The short version
- The Kia EV3 Study Car 2.0’s concept seat is designed for dismantling and material sorting at end of life.
- Recycled and bio-based BASF materials are used in the seat’s foam, upholstery and structure.
- A polyamide back cover could replace the metal frame, combining two parts.
Hyundai, Kia, BASF and Alten Korea have developed a concept seat for the Kia EV3 Study Car 2.0 that is designed to come apart for end-of-life material sorting. Recycled and bio-based BASF materials run through the seat’s cushioning, upholstery and structure.
The headrest uses partly bio-based Elastollan thermoplastic polyurethane foam. Elastoflex W foam in the cushion and backrest contains recycled post-consumer material, while Haptex synthetic leather uses bio-circular feedstock.
The seat’s Ultramid CR RC4 polyamide back cover also contains recycled post-consumer material. The design study would replace the metal back frame with the same polyamide, combining the two parts.
Alten Korea developed the seat architecture to examine how construction and assembly choices affect later dismantling and sorting. The vehicle builds on the EV3 platform and extends the end-of-life design work shown in Hyundai Motor Group and BASF concepts including the 2010 i-flow, 2016 RN30 and 2024 EV3 Study Car.
How this story was made
Written by the Tach Wire desk from the reporting below, checked against each source and for overlap with their text. Photo: Automotive World.
- 01Automotive WorldHyundai, Kia and BASF design concept seat for dismantling
0 comments
Comments stay in this browser. They are not sent to the newsroom.



